Browse all practice questions for the A/C Employment Ready Certification Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

A/C Employment Ready Certification Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Why must local codes be followed when installing an A/C system?
  • What is the recommended indoor relative humidity level for residential spaces during the summer?
  • What are the three basic types of condensers?
  • What can be done to prevent compressor overheating?
  • What is an essential factor in ensuring optimal operation of an A/C system?
  • What is the role of a fan in an air conditioning system?
  • How does an air conditioner improve indoor air quality?
  • What process should be done to remove as much moisture as possible from a refrigeration system?
  • What is the flow rate of a TEV used in R410A systems compared to R22 systems?
  • Which process describes the transition of refrigerant from a liquid to gas state while absorbing heat?
  • When topping off an operating system containing a blended refrigerant, what is the proper method?
  • What symptoms are likely to result from a dirty evaporator in an air conditioning system?
  • Which substance is commonly used as a refrigerant in residential A/C systems?
  • What is a likely effect of a partially clogged capillary tube in an air conditioning system?
  • How can airflow issues in an A/C system be identified?
  • What does reduced airflow in a blower assembly potentially result in?
  • What is the main purpose of the de-superheating process in a condenser?
  • What is one consequence of overcharging a refrigerant in an air conditioning system?
  • What is the primary role of an A/C system's drain line?
  • Which factor is crucial for maintaining optimal performance in an air conditioning system's evaporator?
  • Which of the following are common signs of a refrigerant leak?
  • What is the process called when heat is transferred without any change in the temperature of a substance?
  • What issue can arise from an oversized air-conditioning system?
  • In which scenario is a solenoid valve most critical?
  • What is one reason that A/C systems might freeze up?
  • What is a common indication that the condenser is functioning properly?
  • What does SEER stand for in the context of air conditioning systems?
  • When is it particularly important to check the P-trap in a condensate drain system?
  • What is the first function a condenser must perform before condensing can occur?
  • Why is it important to monitor the condition of the sight glass?
  • What does the term "latent heat" refer to?
  • Which component is best suited for systems with fairly constant loads?
  • Which factor does the SEER rating primarily reflect?
  • What is a heat pump primarily used for?
  • Which of the following methods cannot be implemented as a low ambient temperature control?
  • What is the typical outcome when a compressor is subject to liquid slugging?
  • What could be a result of evaporator coil icing in an air conditioning system?
  • What could be a cause of a partially iced over evaporator?
  • A broken reed valve in a compressor typically results in what symptom?
  • What could cause an A/C system to freeze up?
  • What happens to the thermostatic expansion valve when there is a decrease in superheat?
  • When dealing with A/C installations, adhering to local codes is primarily about what?
  • What does absolute pressure measure?
  • What role does the Heating Seasonal Performance Factor (HSPF) play in A/C systems?
  • When troubleshooting low pressures in an A/C system, which factor should be prioritized first?
  • During a residential service call, a technician finds the unit completely out of refrigerant. What should the technician use to pressurize the system?
  • What type of maintenance is crucial at the beginning of the cooling season?
  • When installing a thermostat static expansion valve sensor bulb, which statement is NOT true?
  • What can happen if there is a blockage in the A/C system?
  • What is the indication of high superheat in a refrigeration system?
  • In a direct expansion (DX) evaporator system, what state does the refrigerant enter the evaporator as?
  • What can be affected by dirty condenser coils?
  • What impact does an undercharge of refrigerant typically have on the evaporator?
  • Which of the following is NOT a method of heat transfer?
  • Which of the following can lead to poor indoor air quality in A/C systems?
  • The heat removed from the refrigerant by the condenser includes what types of heat?
  • What component is essential for a system to switch between heating and cooling in heat pumps?
  • What is true about the solenoid valve in a pump down system?
  • Which of the following symptoms may indicate a problem with the compressor in an HVAC system?
  • After a compressor replacement, a residential split system is not cooling effectively. The evaporator appears starved for refrigerant, and the liquid line is sweating at the dryer. What is the likely cause?
  • A customer reports that their air conditioning system runs constantly but is not cooling adequately. When inspecting, you find the suction line is very cold and the compressor is sweating. What is a likely cause?
  • Which symptoms suggest that a condenser is oil logged?
  • What is the main function of the condenser in an air conditioning system?
  • What is an indicator that an A/C system may require service?
  • A liquid-to-suction heat exchanger is used primarily to achieve what?
  • Which of the following best describes 'sensible heat'?
  • What does a compound pressure gauge measure?
  • Which of the following is NOT classified as a thermodynamic property of refrigerants?
  • What is transferred from the refrigerated space to the refrigerant in the evaporator?
  • How does high humidity affect the efficiency of an A/C system?
  • What is the role of a metering device in an A/C system?
  • What effect does a low refrigerant charge have on a refrigeration system’s performance?
  • What layer of defense does a low-pressure cut off switch provide?
  • What is the main objective of an air conditioning unit during summer months?
  • What procedure is essential before any maintenance on a refrigeration system?
  • If a TEV sensing bulb becomes detached from the suction line, what will happen?
  • Which type of heat causes a change in state of a material without a change in temperature?
  • What essential process occurs in the evaporator coil?
  • What can result from not changing A/C filters regularly?
  • What is a common indicator of low refrigerant in an A/C system?
  • The temperature rise method of determining air volume can be effectively applied to which type of heating system?
  • By what mechanism is the oil pressure safety switch activated?
  • What typical symptom indicates an A/C unit may have a faulty capacitor?
  • What effect does ice formation on the evaporator coil indicate?
  • What is a common effect of dirty air filters on A/C systems?
  • What does the acronym "HSPF" signify in the context of air conditioning?
  • In an air-conditioning system that uses a thermostatic expansion valve, the temperature of the evaporator outlet is typically:
  • An increase in head pressure causes what to occur in a capillary tube?
  • What is the generally accepted range for evaporator airflow in CFM per ton of residential air conditioning?
  • What does SEER stand for in the context of A/C systems?
  • What is the primary purpose of a liquid receiver?
  • What is the function of the compressor in an A/C system?
  • What is a potential outcome of using a "bad" capacitor in an A/C unit?
  • If the R134a high pressure gauge reads 143 psig and the liquid line temperature at the condensing unit is 95°F, what is the system operating sub cooling?
  • Which of the following is considered a refrigerant?
  • What should the state of the refrigerant be in the suction line?
  • An inefficient compressor is typically indicated by what kind of head and suction pressures?
  • Which of the following is a main component of a typical A/C system?
  • Why is sealing ducts important in maintaining A/C efficiency?
  • How does the clearance space in a reciprocating compressor affect its performance?
  • What is a significant consequence of an A/C unit that fails to start?
  • A faulty condenser fan motor in an air-conditioning system will produce which symptoms?
  • What happens in a capillary tube air conditioning system when there is a refrigerant overcharge?
  • Which method is commonly used to assess the efficiency of an A/C system?
  • What device controls a thermal electric (solid-state) expansion valve?
  • What is the minimum vertical drop required from the outlet of the condensate drain pan to the inlet of the P-trap?
  • What is a common effect of overcharging an A/C unit with refrigerant?
  • Which of the following is a symptom of frost developing on a suction line?
  • What is one potential consequence of neglecting to maintain a clean evaporator coil?
  • When connecting copper to steel, which brazing filler alloy is recommended?
  • What is the maximum allowable difference between the refrigerant condensing temperature and the entering air temperature in an air cooled condenser?
  • What safety precautions should be taken when servicing an A/C unit?
  • What effect does high discharge pressure have on an air conditioning system's performance?
  • If water is pooling around an A/C unit, what could this indicate?
  • How often should A/C filters typically be changed for optimal performance?
  • What is the consequence of neglecting regular A/C maintenance?
  • How many operating pressures does a thermostatic expansion valve have?
  • A refrigerant leak in an air conditioning system will typically result in which of the following?
  • How does an A/C system operate in cooling mode?
  • The refrigerant condensing temperature in a water-cooled condenser should be approximately _____ higher than the leaving water temperature?
  • The automatic expansion valve is most effective in which type of system load condition?
  • What is the result when the temperature difference between the evaporator inlet and outlet is significant?
  • What common issue can arise during the installation of an A/C system?
  • If a 30-pound cylinder of reclaimed R-410 refrigerant has been stored at 70°F overnight, what would you expect the pressure to be?
  • When should a system be flushed?
  • What type of heat transfer occurs in liquids and gases due to bulk movement?
  • What is the temperature at which moisture starts to condense from the air known as?
  • Which type of gauge is used to measure microns in a vacuum?
  • In the context of A/C systems, what does the term "superheat" refer to?
  • What is the purpose of a low pressure cut off switch in a refrigerant system?
  • What impact can poorly sealed ducts have on an A/C system?
  • What is the relationship between zero psig (pounds per square inch gauge) and atmospheric pressure?
  • Which component is responsible for changing the refrigerant's pressure?
  • Which component of an A/C system is primarily responsible for circulating air?
  • What is the state of the refrigerant as it enters the condenser?
  • The movement of heat through a fluid or air is referred to as what?
  • How is the efficiency of an A/C system typically assessed?
  • What is the recommended movement speed of the sensor probe when using an electronic leak detector?
  • What is the primary function of an evaporator fan in an A/C system?
  • When using an automatic expansion valve, what effect does a low refrigerant charge have?
  • What primary function does a thermostat serve in an A/C system?
  • What is the term used for heat that causes a change in temperature of a substance?
  • What is the purpose of having refrigerant slightly superheated in the suction line?
  • Which method can significantly improve an A/C system's energy efficiency?
  • Which of the following represents heat energy represented in mechanical work?
  • In a water cooled condenser, the refrigerant condensing temperature should not be more than how many degrees higher than the leaving water temperature?
  • What effect does a rise in evaporator pressure have on the automatic expansion valve?
  • What is the role of the evaporator coil in an A/C system?
  • What could excessive superheat in a refrigeration system indicate?
  • What is the risk of not properly recovering refrigerant from a system?
  • When does a refrigerant give up heat?
  • What symptoms are caused by air or other noncondensible gases in a capillary tube air conditioning system?
  • How should an A/C refrigerant leak be handled?
  • What is the primary function of a TEV in refrigeration systems?
  • What do we call heat that is added to a vapor after a change of state has occurred?
  • What is the standard unit for measuring the quantity of heat in a substance?
  • If refrigerant R-134a vapor enters the condenser at 124 PSIG and 100°F, what pressure will it be approximately at upon leaving at 80°F?
  • What is a common cause of compressor failure in refrigeration systems?
  • Prior to opening a vapor/compression system for service, what must be done with the refrigerant?
  • What is one crucial aspect of maintaining A/C systems during the off-season?
  • What is the correct sequence of steps in the vapor-compression refrigeration process?
  • Which component of an A/C system is primarily responsible for refrigerant circulation?
  • What is the typical lifespan of a residential A/C system?
  • How are solid contaminants from a severe hermetic compressor motor burn out best removed?
  • Which type of air-conditioning compressor is known for its energy efficiency?
  • What type of electrical current do most A/C systems operate on?
  • Which of the following best describes the importance of refrigerants in A/C systems?
  • What is the purpose of an evaporator pressure regulating valve (EPR)?
  • What is the maximum operating pressure setting for an acetylene torch?
  • Why is regular maintenance critical for A/C systems?
  • What is the result of back seating a two-way service valve?
  • What aspect of an A/C system can be affected by inadequate insulation of refrigerant lines?
  • How does the expansion valve contribute to an A/C system?
  • At what temperature will water vaporize in a 28 in Hg vacuum?
  • What must be done periodically to maintain an A/C system's effectiveness?
  • What is the primary function of the evaporator in a refrigeration cycle?
  • What does a temperature differential across a filter dryer indicate?
  • Which of the following should be checked if an A/C unit is blowing warm air?
  • If the cut-off plate is removed from a blower assembly, how does it affect blower performance?
  • In the context of refrigeration, what role does latent heat play?
  • What is the primary purpose of refrigerant recovery in A/C maintenance?
  • What is a major risk of overcharging an A/C system with refrigerant?
  • What is the role of the accumulator in a refrigeration system?
  • The thermostatic expansion valve operates based on which of the following pressures?
  • Why is balancing airflow important in an A/C system?
  • What is the most probable cause of noise in a compressor after an air-conditioning system is repaired and recharged?
  • Where should a liquid line filter dryer be installed?
  • Where is a sight glass typically located in a refrigeration system?
  • Which of the following is not a symptom of a hermetic system that is low on refrigerant?
  • Which component primarily dissipates heat from the refrigerant in an air conditioning system?
  • What can bubbles in the sight glass indicate about the TXV setting?
  • What is the expected temperature of water leaving a condenser if 10 pounds of refrigerant loses 20 BTUs per pound and the entering water temperature is 80°F?
  • What does the automatic expansion valve aim to maintain in an air conditioning system?
  • Frost on the suction line indicates what regarding temperature?
  • What is the function of air filters in an A/C system?
  • Why is it important to insulate refrigerant lines in an A/C system?
  • What can moisture in a refrigeration system cause?
  • What is one benefit of regular maintenance for an A/C system?
  • What defines a ductless A/C system?
  • What symptoms indicate a low refrigerant charge in an air conditioning system?
  • When should an A/C professional be called?
  • What is the primary purpose of an air conditioning system?
  • What is the effect of increased clearance space in a reciprocating compressor?
  • Which tool is used to measure refrigerant levels in an A/C system?
  • What is the function of an accumulator in a refrigeration system?
  • What is the most critical consideration when selecting an evaporator coil?
  • What effect does the compressor have on the refrigerant?
  • What is a common cause of odors from an A/C system?
  • In the context of A/C systems, what is the significance of measuring airflow?
  • What may be indicated by low system amperage draw in an air conditioning system?
  • What is a potential consequence of low refrigerant charge in a system using a TEV or a capillary tube as a metering device?
  • What does A/C stand for in the context of certification?
  • Which of the following is true regarding the relationship between refrigerant and efficiency in A/C systems?
  • What is a capacitor in the context of A/C systems?
  • Low operating pressures and low system amperage in a split system may indicate what problem?
  • Which of the following statements about refrigerants is true?
  • What could cause a compressor to overheat?
  • What effects can insufficient airflow through the evaporator coil have on an HVAC system?
  • Which of the following statements about a capillary tube metering device is NOT true?
  • What is the purpose of a mechanical shaft seal in a compressor?
  • What is the role of a defrost control in heat pumps?
  • What is the purpose of the condenser coil in an A/C system?
  • A thermostatic expansion valve is designed to maintain which of the following?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy